Ericsson EFN324, User Manual, Page: 108 / 176

IndexIndex
<host> ­
The IP address of the node to ping.
Default Setting
None
Example
efn#
ping 172.30.38.1
13.7.6 telnet
Use this command to start a telnet session.
Syntax
telnet <node>
Arguments:
<node>
­
Insert the IP address or the DNS name of the remote
node.
Default Setting
None
Command Usage
This command is used to communicate remotely. A telnet session from an
EFN may be used when an operator is locally connected via the serial port
and wants to connect to another EFN (possibly daisy chained), without having
to switch the physical connection between the Ethernet access switches.
Note that this starts a telnet session originating from the EFN. This must not
be confused with the telnet session originating in some external terminal which
starts an EFN CLI.
Example
efn#
telnet 172.30.38.1