Ericsson EFN324 User Manual Download Page 149

Page: 149 / 176

Glossary

proxy_ip_address <IPaddress> 

Defines the IP address that is

used by the multicast proxy both upwards and downwards. The default

(which is also set by the unset command) is 0.0.0.0.

igmp_immediate_leave no/yes –

Activates or deactivates the

immediate leave function. Immediate leave can only be activated when the
proxy is used.

igmp_query_interval <interval> –

Defines the time interval

between two queries. Also used to calculate the membership time interval.

The range is 1 to 255 seconds.

igmp_query_response_interval <interval> –

Defines the time

interval that the EFN expects a response after a query. Also used to
calculate the membership time interval. The range is 1 to 15 seconds.

vlan_port_mac –



See section

8.5 on page 70 for details on DHCP option 82 header

formats.



no 

DHCP option 82 is not used.



circuit_id_eda –

the EDA format used in the Circuit ID field of DHCP option 82.



circuit_id_tr101 –

the TR101 format is used in the Circuit ID field of DHCP

option 82.



remote_id_eda –

the EDA format is used in the Remote ID field of DHCP option

82.



remote_id_tr101 –

the TR101 format is used in the Remote ID field of DHCP

option 82.



configurable –

option 82 with the Circuit ID and Remote ID Suboptions defined

is used (see

set connection

in section 13.8.9 on page 120)



vlan_port_mac –

option 82 with information about the VLAN Tag, port number

and EFN324 MAC address is used.



vlan_port_sysname –

option 82 with information about the VLAN Tag, port

number and EFN324 SNMP SYS_NAME is used.

real_mac_dhcp_option <0, 128..254>

The option “0” means that

the real MAC option is not enabled. If it is configured to any value from 128

Summary of Contents for EFN324

















































































































































































Search results

Summary of Contents for EFN324

Reviews:

Ericsson EFN324, User Manual, Page: 149 / 176

Search results

Summary of Contents for EFN324

Reviews: