Ericsson EFN324, User Manual, Page: 111 / 176

Glossary
Command Description Page
ethernet_port Configure parameters for the Ethernet port. 126
filter_profile Define filter profiles. 129
global_filter Define the global filters. 130
log packet_logger Configure, start, stop and reset the packet_logger. 158
log trace_logger Start, stop and reset the trace_logger. 160
node_control Define the global parameters for the Ethernet access
switch. 132
rapid_spanning_tree Define the Rapid Spanning Tree (RSTP) function. 135
real_time_clock Set parameters for using the Network Time Protocol. 136
snmp Configure SNMP. 137
software Set the maximum time for trying to upload a software
release.
139
spanning_tree Define the Spanning Tree (STP) function. 140
vlan Configure parameters for the switching domains. 141
13.8.1 add/remove connection
Use this command to configure or remove a specific connection between
VLANs and Ethernet ports. See also
set connection
in section 13.8.9 on
page 120. This command can be used multiple times for the same connection.
For example, if a multicast white list is desired, this is configured by using this
command multiple times, with a different allowed multicast address each time.
Syntax
{add|remove} connection vlan <vlan> ethernet_port <port>
{static_ip_addresses <IP_address>| valid_multicast_groups
<IP_address>| static_multicast_groups <IPv4­address>}
Arguments:
vlan <vlan> ­
Insert the number of the Switching Domain. Range 1 to
200.