Ericsson EFN324, User Manual, Page: 160 / 176

IndexIndex
"tftp://host/path"
“ftps://user:password@hostname/filename”
“sftp://user:password@hostname/filename”.
release make_permanent ­
Appoint the current executing software
version to be the permanent version, that is, the version to be executed by
default at restart.
release remove <version> ­
Remove (delete) <
version>
from
memory.
release start <version> ­
Restart the system by executing
<
version>.
release start_permanent ­
Restart the system by executing the
permanent software version.
release transfer_configuration <version> ­
Copy all
configuration files stored on the disk of the currently executing software
version to the other disk. The configuration file that is designated as
permanent, if any, will keep its status as permanent configuration file in its
new location too.
Default Setting
None.
Command Usage
The switch may simultaneously hold two software versions in memory, since
there are two memory areas, called Disk 0 and Disk 1, reserved for software
and associated configuration files.
In the commands,
release
refers to software release.
New software versions may be downloaded from a server using this
command. There is room for one alternative program version besides the
running current software version. Use the command
get software
to see
the software status, see section 13.11.1 on page 161.
If two software versions are loaded, the command can be used to define the
permanent software version, in other words, the one that by default is executed
at restart.