Ericsson EFN324, User Manual, Page: 137 / 176

Glossary
Syntax
set node_control
[default_vlan vlan <1­200>]
[eda_vmac_format {yes|no}]
[flexible_block_id <switch_id>]
[network_element_id <0­8191>]
[relay_agent_eda_ip <ip_address>]
[relay_agent_eda_sid <sid_value>]
[vmac_address_node_id <0­8191>]
[transfer_protocol <ftp/ftps/sftp/tftp]
[username <undefined>]
[password <undefined>]
[telnet_service <yes|no>]
Arguments:
default_vlan vlan <1­200> –
this configures the switching domain
for the transit traffic in an embedded daisy chain. All traffic received on an
uplink port with an unknown service (for example, an unknown VLAN ID),
is forwarded on the transit_link port. Use
vlan 2
as the
default_vlan
to be compatible with the EMP and PEM.
eda_vmac_format {yes|no}
–
no
selects stand­alone EFN324
VMAC address format, and
yes
selects embedded EFN324 VMAC
address format.
flexible_block_id <switch_id> ­
The flexible block identification
number for an embedded node.
switch_id
is a number from 1 to 254.
Zero and 255 are reserved values. A value of zero causes the DHCP
option 60 to not include the Switch ID.
network_element_id <0­8191> ­
Set the network element ID to a
single integer value, from 0 to 8191. The value is inserted into the 13­bit
Network ID field in the VMAC frame.
relay_agent_eda_ip <ip_address> ­
Set an IP address as the the
relay agent EDA IP, to be used in EDA and TR101 DHCP option 82
formats. The IP address is not the EFN’s IP address, but a configurable
address representing the IP address of the Ethernet Access Node (EAN).
relay_agent_eda_sid <sid_value> ­
Set the relay agent EDA
SID, to be used in EDA and TR101 DHCP option 82 formats. Range is 0 to
65535.