Ericsson EFN324, User Manual, Page: 119 / 176

Glossary
egress –
Parameters are set for outgoing packets.
ingress ­
Parameters are set for incoming packets.
bandwidth_limitation type/none ­
Specify the
bandwidth_limitation profile to be used. The range is 1 to 32.
The bandwidth_limitation profile is defined using the command
set
bandwidth_limitation
. To inspect the bandwidth, use the command
get bandwidth_limitation
, see section 13.11.1 on page 161.
broadcast_allowed no/yes –
Specifies whether broadcast
messages are forwarded or discarded on this connection.
description <string> ­
A text describing the connection.
host_port ­
The port between the network processor (essentially
working at level 2) and the host processor (working at layer 3 and higher
layers).
p_tag <tag>/tranparent ­
The 3­bit user priority in the 4­byte IEEE
802.1Q priority tag of outgoing packets may be set to this value. In the
alternative transparent mode, the p­tag in incoming packets is used
unchanged. The range is 0 to 7 and
transparent
.
flow_selector <flow_selection_criteria> flows <flows>
[default_flow <default_flow>] ­
To connect the flow and the
flow selector at the ingress or egress.
<flow_selection_criteria>
can be
none
,
p_bits
or
dscp. <flows>
can be a number, range or
list of numbers, with valid values 1 to 8.
<default_flow>
is any number
in <
flows>
.
second_p_tag <tag>/transparent ­
The 3­bit user priority in the 4­
byte IEEE 802.1Q priority tag of outgoing packets may be set to this value.
In the alternative
transparent mode , the p­tag in incoming packets is used
unchanged. Range 0 to 7, transparent.
first_ethertype {q_valn|s_vlan|s_vlan_9200|
transparent|vman_vlan}
­ Tag Protocol Identifier for the first tag.
second_ethertype {q_vlan|s_vlan|s_vlan_9200|
transparent|vman_vlan} ­
Tag Protocol Identifier for the second
tag.
tag <VLAN­id>/transparent/untagged ­
VLAN ID for packets
forwarded on this egress connection. Range for VLAN ID is 1 to 4095.