ERGO-FIT VECTOR ABDOMINAL FLEXION Owner'S Manual Download Page 14

Page: 14 / 104

Safety information

⊗

Certain conditions or actions can cause static electrification of electronic

devices. Using earphones can result in short minor electrostatic discharge. To

reduce the risk of electrostatic discharge when using earphones touch a metal

object before connecting the earphones.

⊗

Please review the additional safety and operational notices in this manual.

All safety instructions in this manual are based on many years of experience and self-

conception.

2.2

Instructions for safe operation

⊗

After delivery, make sure that the machine has not been damaged during

transport. In case of doubt, contact our customer service and do not start the

machine.

⊗

Always check the power cord for damages before starting the machine.

⊗

Switch off the machine after the workout and disconnect it.

⊗

Regularly check the cable, wires, steel cable, Kevlar cable and cable clamp for

damage.

⊗

Do not place beverages on your training machine. Instead, use the bottle holder

which is specially designed for beverages.

⊗

Set up the training machine so that there is sufficient open space around it. This

reduces risks to the trainee as well as other people around.

2.3

How to avoid electrical shocks

⊗

Do not use damaged power cords.

⊗

Do not unplug by pulling on the cord.

⊗

Switch off and unplug the machine before you open it.

⊗

If liquid gets inside the machine, unplug the machine immediately and call the

customer service.

⊗

Do not insert any objects in the ventilation slots. This may cause a short

circuit.

⊗

Don‘t run the supply cable under the machine, neither between the mobile

parts or devices of the machine. The insulation could be damaged

unconsciously.

2.4

Choosing the right place of installation

⊗

The machine can be set up on any level and stable floor. Make sure that it

stands firmly on the floor.

⊗

Never put wood, cardboard or similar materials underneath the machine to

compensate surface unevennesses. This increases the risk of an accident.

Summary of Contents for VECTOR ABDOMINAL FLEXION









































































































Search results

Summary of Contents for VECTOR ABDOMINAL FLEXION

Reviews:

Related manuals for VECTOR ABDOMINAL FLEXION

Brands by name

Popular brands

ERGO-FIT VECTOR ABDOMINAL FLEXION, Owner'S Manual

Search results

Summary of Contents for VECTOR ABDOMINAL FLEXION

Reviews:

Related manuals for VECTOR ABDOMINAL FLEXION

Brands by name

Popular brands