ERGO-FIT VECTOR ABDOMINAL FLEXION Owner'S Manual Download Page 27

Page: 27 / 104

VECTOR KRAFT

5.3

Ambient temperature

⊗

Your ERGO-FIT exercise machine may be used at an ambient temperature of
+10°C to +40°C, a relative humidity of 30 to 75% (non condensing) and an
atmospheric pressure of 700 hPa to 1060 hPa without a problem.

⊗

The machine may be stored at a temperature between -30°C and +50°C.

5.4

Mounting

If the devices are not connected by our service team: Remove the cover at the

back before connecting the device. Loosen the screw of the cover with a Phillips

screwdriver. You can access the screw through a hole at the front.

After you have removed the screw, position the supplied magnetic handle at the

center of the cover, carefully slide the cover upwards and pull it towards you to

take it off. Do not use any other methods to take off the cover. This may cause

injuries and may damage the cover and the surroundings.

2 1

Summary of Contents for VECTOR ABDOMINAL FLEXION









































































































Search results

Summary of Contents for VECTOR ABDOMINAL FLEXION

Reviews:

Related manuals for VECTOR ABDOMINAL FLEXION

Brands by name

Popular brands

ERGO-FIT VECTOR ABDOMINAL FLEXION, Owner'S Manual

Search results

Summary of Contents for VECTOR ABDOMINAL FLEXION

Reviews:

Related manuals for VECTOR ABDOMINAL FLEXION

Brands by name

Popular brands