Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG
Transport and Setup
5
Transport and Setup
5.1
Transport
In order to avoid damage, ERGO-FIT machines are transported by ERGO-FIT GmbH
& Co. KG directly or by an authorised freight forwarding company. After delivery,
packaging will be collected and disposed of professionally. If ERGO-FIT machines are
delivered by a freight forwarder, the customer needs to dispose of the packaging
himself or can send it back to ERGO-FIT GmbH & Co. KG (the customer is responsible
for the transportation costs).
5.2
Setup location and installation
1.
Make sure that the surface underneath the machine is flat and level. The
machines are mounted and set up directly by the manufacturer or an authorised
service technician. Only this way can a safe and proper funcion of the machine
be guaranteed.
2.
For safety reasons, please leave enough space around the machine for the
user to move safely and to avoid that bystanders are hurt by moving parts:
Seen from the access orientation, maintain a clearance of at least the training
space plus 0,6 m. Provide enough space for an emergency disassembly.
Adjacent machines may use the same clearance.
3.
Install the device in a way that you can easily unplug the power cable from the
power switch (version T, T MED, CVT and CVT MED)
4.
Remove the transport locks located under the first three weight plates.
5.
Perform a function test after setup or relocation.
2 0
Freibereich
Übungsbereich
Please note:
This owner’s manual contains information on multiple gym machines.
There may be variations in detail according to the type of machine!
