Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG
Operation
7.2
Default settings
To open the administration menu you have to touch the device name on the upper edge
of the display 10 times. To access the advanced settings, touch the menu title 10 times.
Hardware settings:
To change date, time and units. Touch the setting you want to change. It will then be
highlighted according to your color scheme. Press the PLUS and MINUS buttons to
modify the setting. When you are finished confirm your changes by pressing SAVE. Or
press BACK to return to the User Settings menu.
Laser calibration
:
Here you can calibrate the weights if the weight displayed on the Panel PC does not
match the weight selected on the device. In the upper section you will see the number
of plates and their weight. You start laser calibration with the lowest plate (maximum
weight). Select this plate and press SAVE. The Panel PC then displays the next plate and
the corresponding weight. Select this plate and press SAVE. This is repeated for each
weight plate.
Please note: Always perform a complete weight configuration for all plates, even if only
one plate is wrong.
Point calibration
:
The point calibration is easier than the laser calibration, but it is not as exact. For point
calibration you only need to select one plate. All other distances will be calculated based
on the result for this plate. Select the highest plate and press SAVE. You will then
automatically return to the User Settings menu.
Language settings:
Touch the language you want to use. It will be checked and highlighted according to your
color scheme. Confirm your selection by pressing SAVE. Press BACK to return to the
User Settings menu.
4 6
