POWER LINE 4000
Technical and visual modifications as well as misprints reserved -
© 2015
by ERGO-FIT GmbH & Co. KG
The Panel PC consists of a display, some buttons and a chip card reader. Before you take a
closer look at the control panel please consider the following aspects:
1.
Do not lean on the control panel or the display. It may get damaged.
2.
Only press the buttons lightly. When you press a button you will hear a beep.
3.
The chip card reader of the POWER LINE 4100 series is a very sensitive component.
To avoid failure during long-term usage make sure to carefully insert chip cards into
the card reader. When you insert the card you have to be able to read the labeling
when standing / sitting on the machine. The arrows on the left of the corporate
symbol indicate the direction of insertion. The chip card reader‘s lifetime is about
100 000 insertion cycles.
6.3.1
The Buttons
Depending on the displayed panel you will find different buttons on the Panel PC. Please
refer to the following list of the most important buttons to understand their function:
⊗
PLUS: With this button you can increase the intensity or change parameters.
⊗
MINUS: With this button you can decrease the intensity or change parameters.
⊗
START: With this button you can confirm workout mode selections or parameter
settings.
⊗
STOP: With this button you can cancel a function or stop the machine.
⊗
BACK: : Return to the previous panel.
⊗
NEXT: Go to the next panel.
4 3