QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
18
The button
Show
generates a
E1/T1 Channel Usage Statistics
diagram
over the selected criteria. The letters
M
and
K
used in the legend of the
displayed diagrams show the total number of specified criteria:
K
means
thousands and
M
millions.
Fig. II-23: E1/T1 Channel Usage Statistics chart
The
Lines Status
table of any shared
FXO Line
on the Quadro provides
information about the
Allowed Call Types
, the extension number
(attendant or routing client), to whom the
Incoming Call
is
Routed To
and
the
State
of the line (
Free
or
Busy
).
The
FXO Channel Usage Statistics
link is only present for local FXO lines
(this option is not available for shared FXO lines) and leads to the page
where diagram chart of FXO lines usage can be viewed.
Fig. II-24: Line Status - FXO Status page
The
FXO Channel Usage Statistics
page consists of following components used to define the chart parameters:
Trunk
checkboxes are used to select the FXO line number(s) over which
the FXO traffic chart will be built. At least one Trunk checkbox should be
selected, otherwise error message appears.
Time range of statistic table
drop down list includes the period (in days)
statistics data that is to be collected and the corresponding diagram chart
that is to be built.
Incoming Calls
and
Outgoing Calls
checkboxes are used to select
whether the FXO traffic statistics for only incoming or outgoing or for both
type of calls should be displayed in the diagram chart.
Maximum Active Calls
checkbox is used to have the number of maximum
active calls displayed in the diagram chart.
At least one of these checkboxes should be selected, otherwise error
message appears.
Fig. II-25: FXO Channel Usage Statistics page
