QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
16
Static Parameters:
Extension
shows the extension number of the selected telephone line.
Display Name
shows the corresponding name.
Phone State
may have the value
On Hook
or
Off Hook
. For IP Line
Status, this field may additionally have
Not Configured
and
Temporary
Offline
values.
Number of Active Calls
shows the number of calls that are currently
present on the phone.
Dynamic Parameters:
Call State
shows the current state of the extension (in voice mail, in
call, waiting, busy, call out, ring in, etc.).
Caller Party
appears when a call is received and indicates the caller
extension and the IP address or a phone number, depending on type of
call.
Called Party
appears when a call is placed and indicates the
destination extension and the IP address or a phone number,
depending on type of call.
Call Type
shows whether the call is
Internal
or
External
and
whether it
is a
PSTN
call,
PBX
call
or
IP
call.
Call Start Time
shows the call start date and time.
Call Duration
shows the current call duration.
RX Codec
shows the codec used to encrypt the incoming packets.
TX
Codec
shows the codec used to encrypt the outgoing packets. If RX
and TX codecs are the same, only one
Codec
field will be displayed.
Fig. II-20: Lines Status - Lines Status page upon established call
For IP Line Status, the following dynamical parameters appear on this page:
Username
shows the IP phone’s client name registered on the Quadro.
Last Registered
shows the date and time, the corresponding IP phone has been last registered on the Quadro.
Expires In
shows when the last registration of the IP phone will expire.
Binding IP Address
shows the IP address of the IP phone within the Quadro’s LAN network.
The list of supplementary services provides the following additional status information for each telephone line:
Enabled
or
Disabled
.
For
Incoming
and
Outgoing Call Blocking
,
Speed Calling, Hiding Caller Info
,
Voice Mailbox
and
Group List
services, the number of
Entries
will be displayed in the corresponding service table. For
Voice Mail Service
, the voice mailbox configuration mode is displayed here.
This allows administrator to view the status and to be notified about services running on Quadro for every line. The services are designed as links
that guide the administrator to the corresponding service page of the selected user.
