QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide
Administrator’s Menus
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
46
The
Percentage of Total Memory
drop down list allows you to select the space for the extension’s voice mails and uploaded/recorded greetings
and blocking messages. The maximum value in the drop down list is equal to the maximum available space for voice messages on Quadro. When
editing an existing extension and decreasing the voice mailbox size, the system will check the present amount of voice mails in the mailbox of the
extension. If the memory required for these voice mails exceeds the size entered, the system will suggest either to remove all voice messages from
the extension’s voice mailbox or to select a larger size so that the existing voice messages can be stored in the mailbox.
The
Enable Ringing Simulation
checkbox is available on virtual extensions only and enables extra ring tones played to the caller before the voice
mail of the called virtual extension gets activated. If this checkbox is not enabled, the voice mailbox will get activated immediately the call arrives.
The ring tones will be played during the timeout specified in the
Ringing Simulation Timeout
text field.
The
Allow other users to Barge In to this extension
checkbox is used to enable the
Barge In Service
on the extension and to define the access
list. The
Edit Barge In Access List
link moves to the
Barge In Access List
where extensions that are allowed to barge in to the current extension
should be defined and the corresponding permissions should be configured.
The
Barge In Access List
is
only
available when the
Barge In
service is enabled from the
4
Features
page.
From this page a list of extensions that are capable to barge in
the current extension calls and the appropriate permissions can
be defined.
The
Add
functional button opens an
Add Entry
page where an
extension may be added to the list. This page requires the
extension number in the
Address
text field that will be allowed
to barge in. Wildcard is supported for this field to add a group of
extensions with one entry.
The checkboxes on this page allow to select one or more
options of the Barge In service for the extension:
•
Allow Listen In
•
Allow Whisper
•
Allow Barge In
Fig. II-81: Barge In Access List
Fig. II-82: Barge In Access List - Add Entry
2.
SIP Settings
This group is used to configure extension’s SIP registration
settings and consists of the following components:
User Name
requires a user name for the extension registration
on the SIP server. The registration user name needs to be
unique on the SIP server and it is displayed on the called phone
when performing an IP call. This field length is limited to 32
symbols.
Password
indicates the password for the extension registration
on a SIP server.
Registration
Password
is used to confirm the password. If the
entered password does not correspond to the one entered in the
Password
field, the error message “The passwords do not
match. Please try again” will appear.
Fig. II-83: Extensions Management - Edit Entry – SIP Settings page
SIP Server
indicates the host address of the SIP server. The field is not limited regarding symbol usage or length. It can be either an IP address
such as 192.168.0.26 or a host address such as sip.epygi.com.
SIP Port
indicates the host port number to connect to the SIP server. The SIP server port may only contain digit values, otherwise the error message
“SIP Server Port is incorrect” will be displayed when applying the extension settings. If the SIP server port is not specified, Quadro will access the
SIP server through the default port 5060.
Registration on SIP Server
enables the SIP server registration option. If the extension has already been registered on an SIP server, its IP address
will be displayed in brackets.
