Epson TM-930II Series, Operator'S Manual

Page: 58 / 89

ESC i
[Name]
Execute full cut
[Format]
<1B>H<69>H or <27>10<105>10
[Description] Executes a full cut of the receipt paper.
[Notes]
l
Valid only when input at the beginning of a line.
l
Valid only when receipt is selected for printing by ESC c 0.
ESC m
[Name]
Execute partial cut
[Format]
<1B>H<6D>H or <27>10<109>10
[Description]
Executes a partial cut of the receipt paper.
[Notes]
l
Valid only when input at the beginning of a line.
l
Valid only when receipt is selected for printing by ESC
c
0.
ESC o
[Name] Stamp
[Format]
<1B>H<6F>H or <27>10<111>10
[Description]
Executes stamping the receipt paper.
[Notes]
l
Valid only when input at the beginning of a line.
l
Valid only when receipt is selected for printing by ESC
c
0.
ESC p m nl n2
[Name]
Generate pulse
[Format] <1B>H<70>H< m >< n1 >< n2 > or <27>10<112>10<m><n1><n2>
[Range] m = 0
0 < n1 255
0 < n2 255
[Description] The pulse set by n1 and n2 is output to the connector pin m.
l
The value of m is used as follows:
m
Connector pin
0 Drawer kick-out connector 2nd pin
l
ON time is nl x 10 ms, and OFF time is n2 x 10 ms
52