Epson TM-930II Series, Operator'S Manual

Page: 64 / 89

APPENDIX
APPENDIX A General Specifications
1. Printing Specifications
Printing method:
Impact dot matrix
Head wire arrangement:
9 pins in a vertical line; Wire pitch: 1/72 inch
Head wire diameter: 0.29 mm
Printing directions: Bi-directional, minimum distance printing
Characters per second: Refer to Table A-l.
Characters per line:
Refer to Table A-l.
Characters per inch:
Refer to Table A-l.
2. Characters Specifications
Number of characters: Alphanumeric: 95
Katakana: 64
Hiragana: 64
Double-width Kanji:
112
Extended graphics: 128
International characters: 32
Character structure:
9 x 9 3-dot spacing in half dot unit
7 x 9 2-dot spacing in half dot unit
The spacing can be set larger than the above
values by command.
Character size: Refer to Table A-l.
Table A-l. Characters Per Inch, Characters Per Second, Characters
Per Line, character Size
NOTES:
l
Concerning the roll paper width, either 58 mm (57.5 mm ±0.5 mm) or 70
mm (89.5 mm ±0.5 mm) is selectable.
l
The maximum roll paper width for the corresponding mode (58 mm or
70 mm) are shown in the table. Refer to 5-2 Printable Area for the details
of the paper width.
58