Epson TM-930II Series, Operator'S Manual

Page: 57 / 89

[Notes]
l
This command must not be executed continuously more than
two times.
l
If n is out of range and the line feed amount is set to over 1/6
inch, the printer will print, but the paper will not be fed.
l
If the paper gets out of the slip detector during slip printing, the
printer will print, but the paper will not be fed.
l
The user should be noted that paper feeding in the reverse di-
rection causes the following problems.
Paper feed pitch may become incorrect.
The printing noise of the following line will be louder than
normal.
[Default]
The paper may rub against the ribbon and become dirty.
Not defined.
ESC f m n
[Name]
Set cut sheet waiting time
[Format]
<1B>H<66>H< m >< n > or <27>10<102>10< m >< n >
[Range]
0 m 1 5
0 n 6 4
[Description]
Sets the time the printer waits for a slip sheet to be loaded and
the time from when the slip sheet is loaded to when the printer
starts operation.
l
"m” specific the slip sheet waiting time to "m x 1" minutes. If no
slip sheet is loaded after this time period has elapsed, the sIip
sheet mode is automatically canceled, and the sheet(s) set by
the default value of ESC c 0 is selected.
l
When m = 0, the printer waits forever for a slip sheet to be
loaded.
l
"n" specifies the time from when the slip sheet is loaded to when
printer operation begins to
“n x 0.1" seconds.
l
If either m or n is out of the defined range, this command is ig-
nored and the previously set value is not changed.
m = 0, n = 10
[Notes]
[Default]
51