Epson TM-930II Series, Operator'S Manual

Page: 49 / 89

ESC <
[Name] Return home
[Format]
<1B>H<3C>H or <27>10<60>10
[Description] Moves the carriage to the left-most position.
l
The position of the left-most end is detected by the home posi-
tion detector.
[Notes]
l
Because this command can detect the carriage motor mal-
functions, it is desirable to use this command each time a re-
ceipt is issued.
l
The mechanical carriage initialization by this command may
cause printing position misalignment before and/or after this
command is executed.
ESC @
[Name]
Initialize printer
[Format] <1B>H<40>H or <27>10<64l>10
[Description] Clears the data in the print buffer and resets the printer mode
(the same state as when the power is turned on.)
[Notes]
l
The DIP switches are not read again.
l
The data in the receive buffer is not cleared.
l
If this command is executed in slip mode, the slip sheet is
ejected and the switching from slip mode to 2-sheet mode is
performed mechanically.
ESC C n
[Name] Set cut sheet eject length
[Format]
<1B>H<43>H<n> or <27>10<67>10<n>
[Range]
0 n 127
[Description] Sets the eject length for slip sheet to n lines.
l
When n = 0, no eject length will be set.
[Notes]
l
If the line spacing is changed after the eject length is set, the
eject length remains unchanged.
[Default] n = 0
[Reference] FF
43