Epson Stylus Pro 7890 Series User Manual Download Page 204

Page: 204 / 224

204

204

Using the Optional Auto Take-Up Reel

5. To remove your prints, turn the lever to unlock the reel, and then slide it

left. Support the reel with one hand to keep it from falling.

6. Remove the take-up reel core from the paper stop on both ends of the

reel.

Reversing the Paper Stops for a 2-inch Paper Reel Core

You can use a 2-inch roll paper core (after the paper is used up) in the auto
take-up reel. First you need to reverse the paper stops.

1. Remove the paper stop from the drive unit by pinching the clips.

Summary of Contents for Stylus Pro 7890 Series

































































































































































































































Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands

Epson Stylus Pro 7890 Series, User Manual

Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands