Epson Stylus Pro 7890 Series User Manual Download Page 155

Page: 155 / 224

155

Maintaining and Transporting the Printer

155

4. Then press in the cartridge you want to replace. The cartridge pops out.

5. Remove the expended ink cartridge from the printer. It’s a good idea to

save your first set of expended cartridges so you can use them for
transporting the printer, if necessary.

6. Make sure the replacement cartridge is the correct color and remove it

from its package. Gently shake the cartridge for about 5 seconds before
installing it.

WARNING:

Do not shake

the expended cartridge, or
ink may leak out. If ink gets
on your hands, wash them
thoroughly with soap
and water. If ink gets in
your eyes, flush them
immediately with water.

Summary of Contents for Stylus Pro 7890 Series

































































































































































































































Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands

Epson Stylus Pro 7890 Series, User Manual

Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands