Epson Stylus Pro 7890 Series User Manual Download Page 201

Page: 201 / 224

201

Using the Optional Auto Take-Up Reel

201

Winding Prints Forward

1. Tape the leading edge of the paper to the take-up reel core in three

places.

2. Press the

button to feed the paper forward and create some slack.

3. Set the

Manual

switch on the Auto Take-Up Reel to

Forward

and hold

it long enough to take up at least three turns of paper onto the reel.
Make sure adequate slack remains between the roll paper and the
take-up reel.

Note:

When printing on

Singleweight Matte Paper
at least 24 inches wide,
place the tensioner in the
slack area to ensure good
print quality.

Summary of Contents for Stylus Pro 7890 Series

































































































































































































































Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands

Epson Stylus Pro 7890 Series, User Manual

Search results

Summary of Contents for Stylus Pro 7890 Series

Reviews:

Related manuals for Stylus Pro 7890 Series

Brands by name

Popular brands