Epson Stylus Color C70, Service Manual

Page: 175 / 216

EPSON Stylus COLOR C70/C80 Revision A
Maintenance Overview 175
Table 6-1. Oil Applied to the Stylus Color C70/C80
NOTE: No adhesion is used in the Stylus Color C70/C80.
Table 6-2. Lubrication Points Using "O-12"
Table 6-3. Lubrication Points Using G-26
Type Name EPSON Code Supplier
Grease G-26 B702600001 EPSON
Oil O-12 1038991 EPSON
No. Lubrication Type/Point Remarks
1
<Lubrication Point>
Apply oil to the Oil Pad.
Refer to Figurre 6-1 to 6-6.
<Lubrication Type>
O-12
<Lubrication Amount>
• For a main oil pad.
0.49 cc to 0.53 cc
• For 2 sub oil pads.
0.13 cc to 0.16 cc
• For details, refer to Section 6.1.4.
No. Lubrication Type/Point Remarks
1
<Lubrication Point>
• The surface of CR Guide Plate.
Refer to Figure 6-8, "Lubrication point 1".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
Φ4
mm sphere
• Use a brush to apply it.
2
<Lubrication Point>
• The right end of PF Roller unit on metal
surface a circle.
Refer to Figure 6-9, "Lubrication point 2".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
3
mm sphere
• Do not attach the grease to the
paper path.
• Be carefully not lubricate on
coated sureface.
• Do not touch coated surface of PF
Roller.
• Use a brush to apply it.
3
<Lubrication Point>
• PF Roller along the PF Grounding Spring.
Refer to Figure 6-10, "Lubrication point 3".
<Lubrication Type>
• G-26
<Lubrication Amount>
• 4mm
• Use a injector to apply it.
• Lubrication must be along PF
Grounding Spring.
4
<Lubrication Point>
• The left of EJ Unit Roller a circle near the
gear.
Refer to Figure 6-11, "Lubrication point 4".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
3
mm sphere
• Use a brush to apply it.