EPSON Stylus COLOR C70/C80
Revision A
Disassembly and Assembly
Disassembly
113
4.2.5 Print Head / Ink System Unit Removal
1.
Remove the Printer Mechanism. (Refer to Sections 4.2.1.6.)
2.
Remove the Ink Cartridges.
3.
Release the CR Lock Lever.
Figure 4-30. CR Lock Lever Releasing
4.
Remove the ASF Mounting Plate. (Refer to Step 4 of Section 4.2.2.)
5.
Move the Carriage Unit manually to the middle position.
6.
Remove the two screws (2)(CBS 3x6 {8±1 kgf.cm}) that are securing the CR
Guide Plate, and then remove the CR Guide Plate.
Figure 4-31. CR Guide Plate Removal
7.
Disengage the four Hooks, and then remove the Cable Head Holder.
Figure 4-32. Cable Head Holder Removal
W A R N I N G
If the Carriage Unit is moved to the middle position after removing
the CR Guide Plate instead of at this time, the Head will contact
the Front Paper Guide while the Carriage Unit is being moved and
this will damage the Head.
CR Lock Lever
When installing the CR Guide Plate, fit the two dowels into the two
holes.
CR Guide Plate
C.B.S 3x6
Cutting parts
Cable Head Holder
Summary of Contents for Stylus Color C70
