Epson Stylus Color C70, Service Manual

Page: 125 / 216

EPSON Stylus COLOR C70/C80 Revision A
Disassembly and Assembly Disassembly 125
4.2.10 PE Actuator Removal
1. Remove the ASF Unit. (Refer to Sections 4.2.2)
2. Remove the screw (2) (CBS 3x6 {8±1 kgf.cm}) that is securing the PE Actuator.
3. Remove the PE Actuator.
Figure 4-59. PE Actuator Removal
Figure 4-60. PE Actuator
4.2.10.1 Encoder Unit Board Removal
1. Remove the Printer Mechanism. (Refer to Sections 4.2.1.6)
2. Disconnect the connector (white 4-pin) from the Encoder Unit Board Assembly.
3. Remove the screw (11)(CBP 2.5x5 {3.5±0.5 kgf.cm}) that is securing the Encoder
Unit Board Assembly.
4. Remove the Rotary Encoder so that the Encoder Unit Board can be turned to the
left.
C H E C K
P O I N T
When the PE Actuator is removed together with the base, the
Torsion Spring will be easier to remove, so the setting should be
made as shown in the diagram below.
C.B.S 3x6
PE Actuator
PE Actuator PE Lever Base
Torsion Spring