Epson Stylus Color C70, Service Manual

Page: 130 / 216

EPSON Stylus COLOR C70/C80 Revision A
Disassembly and Assembly Disassembly 130
[ASF Unit left side removal]
18. Remove the Torsion Spring and the Change Lever.
Figure 4-70. ASF Unit Left Side Removal (1)
19. Remove the LD Roller Shaft together with (1) the Drive LD, (2) the Clutch and (3)
the Extension Spring 0.5.
Figure 4-71. ASF Unit Left Side Removal (2)
20. Remove the screw (7) (CBP 3x6 {5±1 kgf.cm}) that is securing the Combination
Gear 18.4, 32.8, and then remove the Combination Gear.
21. Remove the screw (4) (CBS 3x8 {8±1 kgf.cm}) that is securing the ASF Left
Frame, and then remove the ASF Left Frame.
Figure 4-72. ASF Unit Left Side Removal (3)
22. Remove the screw (7) (CBP 3x6 {5±1 kgf.cm}) that is securing the Planetary
Gear Set, and then remove the Planetary Gear Set.
23. Remove the screw (7) (CBP 3x6 {5±1 kgf.cm}) that is securing the Spur Gears
12, and then remove the Spur Gears 12.
24. Remove Spur Gear 22.4.
Torsion Spring
Change Lever
LD Rolled Shaft Unit
Drive LD
Clutch
LD Rolled Shaft Unit
„
There is a U-type Spring at the left end of the Shaft. Set it so that
the concave part is on the inside (LD Roller side) and the convex
side is on the outside (Frame Left Side).
„
At the stage just before inserting the LD Roller Shaft, the
following parts must be installed: (1) Drive LD, (2) Clutch, (3)
Extension Spring 0.5.
1. Hang Extension Spring 0.5 to the Hook of Drive LD by using tweezers.
2. Hang Extension Spring 0.5 to the Hook of Clutch and insert the Shaft of
Drive LD into the hole of Clutch.
C.B.S 3x8
Combination Gear 18.4, 32.8
C.B.P 3x6
Plain Washer
3.1x0.5x8.85