Epson Stylus Color C70, Service Manual

Page: 176 / 216

EPSON Stylus COLOR C70/C80 Revision A
Maintenance Overview 176
5
<Lubrication Point>
• EJ Unit Roller along the EJ Grounding
Spring.
Refer to Figure 6-12, "Lubrication point 5".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
4
mm
• Use a injector to apply it.
• Lubrication must be along EJ
Grounding Spring.
6
<Lubrication Point>
• The inner of EJ Roller Holder Assy along
the axes direction.
Refer to Figure 6-13, "Lubrication point 6"”
<Lubrication Type>
• G-26
<Lubrication Amount>
•
Τ
he whole length
• Use a injector to apply it.
7
<Lubrication Point>
• The 3 shafts of PF Frame Assy on outside
end.
Refer to Figure 6-14, "Lubrication point 7".
<Lubrication Type>
• G-26
<Lubrication Amount>
• Whole shaft length
• Use a brush to apply it.
8
<Lubrication Point>
• To LD Rolled Shaft like (Figure 5).
Refer to Figure 6-15, "Lubrication point 8".
<Lubrication Type>
• G-26
<Lubrication Amount>
• Whole circle about 4mm width
• Use a brush to apply it.
No. Lubrication Type/Point Remarks
9
<Lubrication Point>
• Two shaft and one hole of Left ASF Frame.
Refer to Figure 6-16, "Lubrication point 9".
<Lubrication Type>
• G-26
<Lubrication Amount>
• Whole circle but no pile
• Use a brush to apply it.
10
<Lubrication Point>
• The gear face of Spur Gear 12.
Refer to Figure 6-17, "Lubrication point 10".
<Lubrication Type>
• G-26
<Lubrication Amount>
• Whole circle on two end gear face.
• Use a brush to apply it.
11
<Lubrication Point>
• Two shaft and one hole of Right ASF Frame.
Refer to Figure 6-18, "Lubrication point 11".
<Lubrication Type>
• G-26
<Lubrication Amount>
• Right round on two shaft and one hole of
Right ASF Flame without pile.
• Use a brush to apply it.
12
<Lubrication Point>
• On the shaft of Left ASF Flame unit.
Refer to Figure 6-19, "Lubrication point 12".
<Lubrication Type>
• G-26
<Lubrication Amount>
• About 2 or 3 particle
• Use a brush to apply it.
No. Lubrication Type/Point Remarks