Epson Stylus Color C70, Service Manual

Page: 123 / 216

EPSON Stylus COLOR C70/C80 Revision A
Disassembly and Assembly Disassembly 123
3. Remove the Bushings 5 from the mounting holes at both ends, and turn the EJ
Roller Unit upward.
Figure 4-55. EJ Roller Unit Removal
4. Lift up the EJ Roller Unit to remove it.
4.2.9 Motor Removal
4.2.9.1 PF Motor Removal
1. Remove the Printer Mechanism. (Refer to Sections 4.2.1.6)
2. Remove the Main Shield Plate (Right) from the Main Board.
3. Disconnect the connector (CN14: black 2-pin) from the Main Board Assembly.
4. Remove the Extension Spring that is securing the PF Motor.
5. Loosen one of the two screws (8) (CC 3x4 (3.5±0.5 kg.cm) to release the Timing
Belt tension. Then remove the Timing Belt for the PF Motor from the PF Motor
Pinion Gear.
6. Remove the screw (8) (C.C 3x4 {3.5±0.5 kgf.cm}) and the screw (9) (PF Mount
{3.5±0.5 kgf.cm}) that are securing the PF Motor Assembly.
Figure 4-56. PF Motor Assembly Removal (1)
When installing the EJ Roller Unit to the PF Frame, the Shaft side
of the CR Lock Lever Unit should be facing to the right.
EJ Roller Unit
EJ Roller Unit
Bush 5
Bush 5
Timing Belt
C.C 3x4
PF Mount
Extension Spring