EPSON Stylus COLOR 760
Revision C
Disassembly and Assembly
Disassembly Procedures
86
Figure 4-11. Installing the Spacer Tray
C A U T I O N
1.
When installing the Waste Ink Absorber Tray Assembly,
make sure to fix it with the Spacer Tray in the left side of
the printer mechanism. Refer to the Figure 4-11.
2.
Be careful not to damage Loop Scale when the Tray Spacer
is removed.
A D J U S T M E N T
R E Q U I R E D
1.
When the Waste Ink Absorber was replaced, perform the
following Panel Reset Function for ink overflow counter.
Turn on the Printer while holding the “Load/Eject
SW”+”Cleaning SW”, and hold “Cleaning SW” 10 seconds.
For details, Refer to the Chapter 5 Section 5.2.3.11.
Otherwise, perform the waste ink counter reset operation
by using the adjustment program.
Space Tray
Summary of Contents for Stylus Color 760
