After wrapping the paper around the core,
ensure that paper around the core is sufficiently
loose.
J
Set the Auto switch to Backward.
Removing Paper from the Auto
Take-up Reel Unit
This section describes how to remove paper from the
auto take-up reel unit.
Caution:
Removing paper from the auto take-up reel unit
requires two workers, one on each end of the roll.
A single worker working by his or herself could drop
the roll, resulting in injury.
A
Set the auto take-up reel unit Auto switch to Off.
B
Cut the paper and take it up until it is all on the
auto take-up reel unit roll core.
U
“Manual cut method” on page 32
After cutting the paper, support the end to
prevent the printed surface touching the floor;
continue to support the paper until it is all taken
up. Keep the Manual switch pressed in the
take-up direction (either Forward or Backward).
C
Unlock the movable unit and remove it from the
roll core.
When removing the movable unit, support the
roll core with one hand to prevent it falling to the
floor.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Basic Operations
47
