manualshive.com logo in svg

Epson S1C88 Series, Manual

Share
Download
Epson S1C88 Series Manual Download Page 75

CHAPTER 9  SEGMENT OPTION GENERATOR <winsog>

S5U1C88000C MANUAL II

EPSON

63

WORKBENCH/DEV TOOLS/OLD ASSEMBLER

CHAPTER

 9 S

EGMENT

 O

PTION

 G

ENERATOR

<winsog>

9.1 Outline of winsog

Some types of microcomputers in the S1C88 Family allow the LCD output pin output specifications and
LCD output pin assignments to be set with hardware options, so that mask patterns for the IC are
generated according to option settings. The Segment Option Generator <winsog> is the software tool for
creating the files required to generate mask patterns. Its graphical user interface (GUI) ensures simple
mask option setting.
In addition, simultaneously with this file, winsog can create mask option setup files (Motorola S2 format
data) that are required when debugging programs with the ICE (S5U1C88000H5). When using the ICE to
debug a program, you can download this file from the host computer, making it possible to realize
optional functions on the ICE that are equivalent to those on the actual IC.

Note: The Segment Option Generator <winsog> is provided for only certain types of microcomputers that

have set segment options.

9.2 Input/output Files

Figure 9.2.1 shows the input/output files of winsog.

Selection of 
mask options

zzzzzzzz.sad

zzzzzzzz.sdc

winsog

Segment assignment

data file

Segment option 

document file

Function option 
document file

zzzzzzzz.ssa

Segment option 

HEX file

To ICE

Mask data creation 

by mask data checker

zzzzzzzz.fdc

Device information

definition file s1c88xxx.ini

Fig. 9.2.1  Input/output files of winsog

Device information definition file (s1c88xxx.ini)

This file contains option lists for various types of microcomputers and other information. Always be
sure to use the files presented by Seiko Epson. This file is effective for only the type of microcomputer
indicated by the file name. Do not modify the contents of the file or use the file in other types of
microcomputers.

Function option document file (zzzzzzzz.fdc)

This is the text format file generated by winfog and contains the selected mask options. This file is
required only when the segment option setup condition depends on the mask option selected with
winfog.

Segment option document file (zzzzzzzz.sdc)

This is a text format file in which setup contents of segment options are stored. You can read this file
into winsog and correct the option settings. This file is packed along with completed other program/
data files into a single file by the mask data checker <winmdc>, which will be presented to Seiko
Epson as the mask data file. From this file, Seiko Epson will create the mask patterns for the IC.

Summary of Contents for S1C88 Series


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands