Epson S1C88 Series Manual Download Page 326

Page: 326 / 353

Linker lk88 (3)

Main Tool Chain

Error Messages

Fatal Errors (F)

F 410: Illegal object

Inconsistency found in the object module at unknown
offset.

F 413: Only

name object can be

It is not possible to link object for other processors.

linked

F 414: Input file

file same as

Input file and output file cannot be the same.

output file

F 415: Demonstration package

One of the limits in this demo version was exceeded.

limits exceeded

Verbose (V)

V 000: Abort !

The program was aborted by the user.

V 001: Extracting files

Verbose message extracting file from library.

V 002: File currently in progress:

Verbose message file currently processed.

V 003: Starting pass

number

Verbose message, start of given pass.

V 004: Rescanning....

Verbose message rescanning library.

V 005: Removing file

file

Verbose message cleaning up.

V 006: Object file

file format format Named object file does not have the standard tool chain

object format TIOF-695.

V 007: Library

file format format

Named library file does not have the standard tool chain
ar88 format.

V 008: Embedded environment

Embedded environment successfully read.

name read, relaxed
addressing mode check
enabled

Summary of Contents for S1C88 Series


































































































































































































































































































































































Search results

Summary of Contents for S1C88 Series

Reviews:

Brands by name

Popular brands

Epson S1C88 Series, Manual

Search results

Summary of Contents for S1C88 Series

Reviews:

Brands by name

Popular brands