CHAPTER 8 FUNCTION OPTION GENERATOR <winfog>
60
EPSON
S5U1C88000C MANUAL II
WORKBENCH/DEV TOOLS/OLD ASSEMBLER
(5) Correcting an existing document file
You can read an existing function option document file into winfog and correct it as necessary.
To read a file, select [Open] from the [File] menu or click the [Open] button.
[Open] button
The dialog box shown below appears, so enter a file name including the path in the text box or select a
file by clicking the [Ref] button.
Click [OK], and the file is loaded. If the specified file exists and there is no problem with its contents,
the option list and the function option document areas are updated according to the contents of the
file. To stop loading the file, click [Cancel].
Perform steps (2) to (4) to update the file.
If you select [Generate] without changing the file name, the message shown below is displayed asking
you whether or not to overwrite the file. Click [Yes] to overwrite or [No] or [Cancel] to stop overwrit-
ing. Use the [Setup] dialog box to change the file name.
Note: The function option document file can be read only when the device information definition file has
been loaded.
(6) Quitting
To terminate winfog, select [End] from the [File] menu.
