background image

CHAPTER 13  S1C88 FAMILY DEBUGGER

S5U1C88000C MANUAL II

EPSON

173

WORKBENCH/DEV TOOLS/OLD ASSEMBLER

(3) During log output

If the command execution result is output to a log file as specified by the log command, code is
displayed in the [Command] window and its contents are also output to the log file.
If the [Source] window is closed, code is displayed in the same way as in (2) above.
If the [Source] window is open, the window is redisplayed. In this case, the same number of lines is
displayed in the [Command] window as displayed in the [Source] window.

(4) Successive display

If you execute the sc command after entering it from the keyboard, code can be displayed successively
by entering the [Enter] key only until some other command is executed.
When you press the [Enter] key, the [Source] window is scrolled forward one screen.
When displaying code in the [Command] window, 17 lines of code following the previously displayed
address are displayed (the same number of lines as displayed in the [Source] window if the sc com-
mand is executed during log output).

Notes

  • Source codes can be displayed only when an absolute object file that contains source debug informa-

tion has been loaded.

  • The display start address you specified must be within the range of the program memory area

available with each microcomputer model.
An error results if the limit is exceeded or the input one is not a hexadecimal number or not a valid
symbol.

GUI utility

[View | Source | Source] menu item, [Source] button

When this menu item or button is selected, the [Source] window opens or activates and displays the
program from the current PC address.

 [Source] button

Summary of Contents for S1C88 Series


































































































































































































































































































































































Reviews: