Epson Pro L1060U, User Manual

Page: 240 / 315

240
Setting Options Description
A/V Settings A/V Output
Monitor Out
Audio Settings
Selects various audio and video
output settings
A/V Output : select to output
audio and video to an external
device when the projector is in
standby mode (Standby Mode
must be turned on to use this
setting)
Monitor Out : select the image
source to output to an external
device when the projector is in
standby mode; when set to
Auto ,
selects output from the
Computer or BNC port
depending on which was used
when the projector went into
standby mode
Audio Settings : selects the
audio source to output to an
external device
Standby Mode Communication On
Communication Off
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to
Always On )
• Communication from the
HDBaseT port (Control
Communications must be set
to
On )