150
and you have exceeded the usage hours listed here, you may not be able to select a high
Brightness
Level
setting.
Parent topic:
Adjusting Luminance Controls
You can turn on the
Dynamic Contrast
setting to automatically optimize the image luminance. This
improves the image contrast based on the brightness of the content you project. You can also set the
light source to turn off automatically after a certain time period while projecting at a specific brightness
level.
1.
Turn on the projector and switch to the image source you want to use.
2.
Press the
Menu
button.
3.
Select the
Image
menu and press
Enter
.
4.
Select the
Light Source Control
setting and press
Enter
.
Summary of Contents for Pro L1060U
