Epson Pro L1060U User Manual Download

Page: 289 / 315

289

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:

• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the

projector, it cannot send an e-mail.)

• Make sure you set up the projector e-mail alert settings correctly on the projector's network

Notifications menu or in the network software.

• Set the

Standby Mode

setting to

Communication On

so the network software can monitor the

projector in standby mode.

Parent topic:

Solving Network Problems

Related references

Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu

Solutions to Problems using Content Playback

If you cannot play back a playlist correctly, try the following solutions:

• Check the following on all projectors:

• All projectors are the same model. If any of the projectors are a different model or have a different

resolution, synchronized playback may not be performed properly.

• Make sure the name, date, and time settings are correct.

• Make sure all projectors are connected to the same network.

• Make sure the

Content Playback

setting is turned on in the Settings menu.

• Make sure your USB device contains a playlist.

• Make sure your USB device is connected directly to the projector and not through a USB hub or card

reader.

• If the USB device is partitioned, you may not be able to play back playlists. Delete all of the partitions

before saving the playlists on your USB device.

• Do not share a playlist between projectors that are different in resolution. Color and shape effects

added by using the

Overlay Effect

setting may not be reproduced correctly.

Parent topic:

Solving Problems

Summary of Contents for Pro L1060U




























































































































































































































































































































Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands

Epson Pro L1060U, User Manual

Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands