172
1.
Press the
Split
button on the remote control.
The currently selected input source moves to the left side of the screen.
2.
Press the
Menu
button.
You see this screen:
3.
To select an input source for the other image, select the
Source
setting, press
Enter
, select the
input source, select
Execute
, and press
Enter
. (You can also change image sources, if necessary.)
4.
To switch the images, select the
Swap Screens
setting and press
Enter
.
5.
To change the image sizes, select the
Screen Size
setting, press
Enter
, select a sizing option,
press
Enter
, and press
Menu
to exit.
Note:
Depending on the video input signals, the images may not appear at the same size even if you
choose the
Equal
setting.
Summary of Contents for Pro L1060U
