Epson Moverio Pro BT-2000 Developer'S Manual Download Page 69

Page: 69 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

・Remarks

At timing of Start button pressed, data necessary for system operation like S/N ratio and lms

file will be applied to the system. While voice command is in operation（When voice detection

is available）, setting value like S/N ratio that changed by the App does not apply when

pressing the Start button. In this situation, press Stop button once, stop the voice command

and then change again the setting value and press the Start button.

５．

Voice information（lms）file

Use Voice information （lms） that is stored inside BT-2000 system. For detail, refer to chapter

5.7.4 Voice information file(lms file) list and vocabulary list.

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands