Epson Moverio Pro BT-2000 Developer'S Manual Download Page 48

Page: 48 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

5.1.

Pre-cautions for developing Voice commands Apps

Please make sure to confirm the version of SDK provided by EPSON and the version of system

software inside BT-2000.

If the version of SDK provided by EPSON used for Apps development and the version of system

software is not matching, due to the difference of API included, developed Apps may not operate.

※User using system software version R1.0.4

When updating OS from R1.0.4 to R1.2.1 or later, adding callback API process which is newly

added is required.

This phenomenon may occur in below Apps.

・Apps using Voice command class(VoiceCommandClientCallbacks)

If it happens, please solve by below procedure.

１） Change the SDK of Apps development environment to SDK that matching system software

version.

２） Revise the source code according to SDK and re-build.

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands