Epson Moverio Pro BT-2000, Developer'S Manual

Page: 104 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)
98

Usage procedure

Remarks

If this method is used after executing startPreview, you can execute by selecting
your own timing.

When resuming a preview using stopPreview -> startPreview, make sure you
execute this method to resume depth information acquisition.

When resuming a preview startPreview after executing takePicture, make sure
you execute this method to resume depth information acquisition.

You need to restart the application if the application closes in a RuntimeException.
/*Start camera*/
camera = Camera.open();
/*Acquire current parameter (or default value)*/
Camera.Parameters params = camera.getParameters();
/*Set the camera mode to depth-only*/
params.setEpsonCameraMode(Camera.Parameters.EPSON_CAMERA_MODE_DEP
TH_ONLY);
/*Reflect camera setting in camera device*/
camera.setParameters(params);
/*Start preview*/
camera.startPreview();
/*Start depth information acquisition*/
camera.startDepthStreaming();