Epson Moverio Pro BT-2000 Developer'S Manual Download Page 15

Page: 15 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

2.3.

Introduction to the Android SDK

The introduction to the Android SDK assumes the following steps will be performed in a

Windows7 environment.

2.3.1.

Acquiring Android Studio

Download Android Studio from the following Website.

https://developer.android.com/sdk/index.html

2.3.2.

Acquiring and installing JDK

Download the JDK (7 or later) from the following Website, and then install.

http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html

(Not sure if it’s a good idea to include the link above as it may change over time)

2.3.3.

Installing Android Studio

Follow the directions provided by the installer to install Android Studio.

Example) C:

Users

User name

AppData

Local

Android

sdk

* From here on, instructions assume Android Studio is installed in the folder above.

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands