Epson Moverio Pro BT-2000, Developer'S Manual

Page: 139 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)
133
8.6. Application interface list
Tables 8-9, 8-10, and 8-11 provide a list of application interfaces.
Table 8-9 android.bluetooth.BluetoothLeAdapterManager for application interface list
NO. Function name Function summary
1 getInstance Acquires instance.
2 isEnable Acquires enable/disable status for BLE.
3 enable Enables BLE.
4 disable Disables BLE.
5 startScan Starts scanning for the BLE.
6 stopScan Stops scanning for the BLE.
7 getDeviceName Acquires the local device name.
8 getBdAddress Acquires the local BD device.
9 connect Starts connecting to the BLE device.
10 connectCancel Cancels connecting to the BLE device.
11 disconnect Disconnects from the BLE device.
12 setAuthType Sets the authentication type.
13 notifyInputPasskey Sets the Pad Key entry.
14 setGapCallback Registers a callback for the GAP function.
15 discPriSrv(char) Searches for the Primary Service for the BLE device.
16 discChar Searches for the Characteristic for the BLE device.
17 discCharDesc Searches for the Characteristic Description for the BLE device.
18 readGatt Acquires the Characteristic Value and the Characteristic
Descriptor.
19 readUuidGatt Acquires the Characteristic Value for the set UUID.
20 writeWithoutRspGatt Writes the Characteristic Value (without a response)
21 writeGatt Writes the Characteristic Value and the Characteristic
Descriptor.
22 confirmation Executes an Indication response.
23 setGattCallback Registers a callback for the GAP function.