Epson Moverio Pro BT-2000 Developer'S Manual Download Page 120

Page: 120 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

114

7.1.

Sensor control summary

The BT-2000 is equipped with an IMU (high precision, high stability inertia measurement unit), a

geomagnetic sensor, and an ALS (ambient light sensor). Tap detection and azimuth detection are

also available.

7.1.1.

IMU and the geomagnetic sensor

The BT-2000 is equipped with an IMU and a geomagnetic sensor. The IMU can detect tri-axis

acceleration and tri-axis angular velocity. The IMU allows high precision stance detection. There is

also a built-in tri-axis geomagnetic sensor which combined with the IMU allows for azimuth

calculations.

IMU sensor data can be received same as normal sensors by using Android standard API.

The following shows the specifications for the IMU and the geomagnetic sensor.

Sampling rate

Range

IMU

Acceleration

Max. 125 Hz

±5.8 G

Angular velocity

Max. 125 Hz

±450 deg/s

Geomagnetic sensor

Max. 100 Hz

±1200 μT

＋Y

＋X

＋Z

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands