Epson Moverio Pro BT-2000 Developer'S Manual Download Page 75

Page: 75 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

6.5.

Depth data characteristics

Depth data is managed using 8 bit gray scale data, whereby the data values (brightness)

indicate the distance.

The higher the depth value brings the depth data distance closer, and reducing the value makes

it further away. When converting the brightness as gray scale data, the highest value of 255

brings the distance closer, and the lowest value of 0 makes it further away.

Figure 6

3 Shooting depth images

Furthermore, use data inferred in this way as the correct value is not provided in the product

specifications for depth data with a 50 pixel edge.

Figure 6

4 Available range for depth data

Far

Near

Except for surrounding 50

pixels,

the 540x380 area is available

50pixel

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands