Epson Moverio Pro BT-2000 Developer'S Manual Download Page 123

Page: 123 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

117

7.2.

Using the sensor

The sensor uses the standard Android API, SensorEventListener. The following lists the available

sensor types and usage examples.

7.2.1.

Sensor type

The BT-2000 can use the following sensors. The following sensor types are also defined in the

Android Sensor class.

Sensor type

ID (Hex)

Constant name

IMU

Accelerometer

0x00000001

TYPE_ACCELEROMETER

Gyroscope

0x00000004

TYPE_GYROSCOPE

Geomagnetic sensor

0x00000002

TYPE_MAGNETIC_FIELD

ALS

Sensor Illumination

0x00000005

TYPE_LIGHT

Others

Tap detection

0x00002001

TYPE_HEADSET_TAP

Azimuth detection

0x00000003

TYPE_ORIENTATION

* You can acquire the above from the Android Sensor class.

7.2.2.

Import module

To use sensors, import below module.

android.hardware.Sensor

android.hardware.SensorEvent

android.hardware.SensorEventListener

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands