Epson Moverio Pro BT-2000 Developer'S Manual Download Page 107

Page: 107 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

101



Remarks:



To use the depth information application, you need to describe the process in
onDepthMap.



To execute onDepthMap, you need to meet all of the following conditions.
(1)

The camera mode is set by either EdoF mode or depth-only mode.

(2)

startPreview is executed.

(3)

startDepthStreaming is executed.

(4)

A callback method is registered in setDepthCallback.



In EDof mode, receiving depth information, display preview and receiving preview
data can be executed in parallel.



For depth-only mode, preview display is unavailable. To display depth data as an
image, you need to convert the data captured to image format to display images.

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands