Epson ET-M2120 Series, User Manual

Page: 104 / 231

c
Important:
Be careful not to touch the rail (B). Otherwise, you may not be able to print. Do not wipe off the grease on the
rail, because this is necessary for operations.
4.
Moisten a cotton swab with the water with a few drops of detergent so that it is not dripping water, and then
wipe the smeared part.
c
Important:
Wipe off the smear gently. If you press the cotton swab too hard to the film, the springs of the film may be
dislocated and the printer may be damaged.
5.
Use a new dry cotton swab to wipe the film.
c
Important:
Do not leave any fibers on the film.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
6.
Repeat steps 4 and 5 until the film is not smeared.
7.
Visually check that the film is not smeared.
Cleaning the Printer
If the printer’s outer case is dirty or dusty, turn off the printer and clean it with a soft, clean, and moist cloth. If you
cannot remove the dirt, try cleaning with a soft, clean, and moist cloth moistened with a mild detergent.
Maintaining the Printer
>
Cleaning the Printer
104