Epson EcoTank ET-4856, User Manual

Page: 219 / 309

Straight Lines Appear when Sending Faxes from the ADF
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
&
“Cleaning the ADF” on page 117
The Image Quality of the Sent Fax is Poor
The following causes can be considered.
The resolution is set to low.
Solutions
If you do not know the performance of the sender’s fax machine, set the following before sending a fax.
❏
Select Fax > Fax Settings and then make the Resolution setting to set the highest quality image.
❏
Select
Fax
>
Fax Settings
and then enable
Direct Send
.
Note that if you set Resolution to Photo but you send the fax without enabling Direct Send , the fax
may be sent at a lower resolution.
ECM setting is disabled.
Solutions
Select
Settings
>
General Settings
>
Fax Settings
>
Basic Settings
and enable the
ECM
setting on the
control panel. This may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when ECM is disabled.
An Image of the Reverse Side of the Original Appears in the Sent Fax
Solving Problems
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
The Quality of the Sent Fax is Poor
219