Epson Artisan 700 Series, Service Manual

Page: 97 / 235

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W Revision C
DISASSEMBLY/ASSEMBLY Disassembly Procedures 116
Confidential
4. Slide the Ratchet Holder Assy to the left, and release the rib A. (See Fig.
4-36 .)
5. Slide the Ratchet Holder Assy to the front to remove it from the Upper
Housing, and remove it from the Panel Unit.
Figure 4-36. Removing the Ratchet Holder Assy (2)
6. Release the hooks (x3) of the Front Panel Unit Cover. (See Fig. 4-37 .)
7. Slide the Upper Panel Cover in the direction of the arrow to release the hooks
(x6), and remove the Upper Panel Cover.
Figure 4-37. Removing the Panel Unit (1)
8. Disconnect the Panel FFC from the connector of the Panel Unit. (See Fig.
4-38 .)
9. Remove the screw (x1) that secures the Panel Unit and remove the Panel Unit
from the Upper Housing.
Figure 4-38. Removing the Panel Unit (2)
Step 4
Rib A
Panel Unit
Step 5
Ratchet Holder Assy
Front Panel Unit Cover
Panel Unit
Upper Panel Cover
Hook of the Upper Panel Cover
Hook of the Front Panel Unit Cover
„ Align and insert the dowel of the Right Hinge to the positioning
hole of the Panel Unit. (See
Fig. 4-38 .)
„ Insert the rib A of the Ratchet Holder Assy to the position
shown in
Fig. 4-36 . (See Fig. 4-36 .)
A D J U S T M E N T
R E Q U I R E D
After removing/replacing the Panel Unit, make the specified
adjustments. (See
Chapter 5 "ADJUSTMENT" .)
Positioning hole & dowel
C.B.P. 3x10 (6±1Kgfcm)
Panel Unit
Panel FFC
Connector
Upper Housing