Note:
For the
WPS-PBC
operation on the wireless LAN access point, refer to the manual supplied with the
wireless LAN access point.
When the
WPS-PBC
operation is successful and the printer is rebooted, wireless LAN connection is
completed.
Operator Panel
1. Select
Operator Panel
, and then click
Next
.
2. Follow the on-screen instructions until the
Check Setup
screen appears.
3. Confirm there are no errors displayed on the LCD panel, and then click
Start Installation
.
If you see any errors, click
Trouble Shooting Guide
and follow the instruction.
4. Check if the printer to be installed is listed in the
Select Printer
screen, and then click
Next
.
Note:
If the printer to be installed is not listed in the
Select Printer
screen, try either of the following steps:
❏
Click
Refresh
to update the information.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation
73